Travis Industries Medium Flush Wood Hybrid Fyre Insert
Travis Industries Medium Flush Wood Hybrid Fyre Insert is a hybrid (catalytic + secondary burn) wood stove from Travis Industries certified at 1.7 g/hr particulate emissions with 76% HHV efficiency and a 14,483–69,982 BTU/h output range (previously certified, no longer in production).
Previously certified (out of production). This model appears in the EPA Certified Wood Heater Database but is no longer on the current certified list, which usually means it is no longer manufactured. The specifications below are its certified figures, kept for reference and for owners of installed units. Browse currently certified heaters for models sold new today.
| Appliance type | wood-stove |
|---|---|
| Combustion technology | Hybrid |
| Certified fuel | Cord Wood |
| Covered model numbers | Medium Flush Wood Hybrid Fyre Insert |
| Emission rate | 1.7 g/hr |
|---|---|
| Carbon monoxide | 1 g/min |
| Efficiency (HHV) | 76 % |
|---|
| Heat output (low) | 14483 BTU/h |
|---|---|
| Heat output (high) | 69982 BTU/h |
| Firebox volume | 2.02 cu ft |
| 25C tax credit eligible (≥75% HHV) | Yes |
|---|---|
| 2020 NSPS compliant | Yes |
| Currently in production | No |
| EPA certification number | 144-18 |
What space does the Travis Industries Medium Flush Wood Hybrid Fyre Insert suit?
- Its 69,982 BTU/h peak output covers roughly 2,000–2,800 sq ft at the 25–35 BTU/h-per-square-foot rule of thumb — see the sizing calculator to adjust for your insulation and climate.
- The 2.02 cu ft firebox puts it in the mid-size home class.
- Rough fuel use: about 3 cords per season at the midpoint of its output range (8 burn-hours/day, 150-day season, 22 MMBtu/cord — see methodology).
- Certified burning Cord Wood — the test fuel closest to real-world firewood.
Similar wood stoves
- GHP Group Pleasant Hearth Large Wood Stove GWS-2200 (1.5 g/hr)
- Travis Industries 36 Elite (1.3 g/hr)
- Travis Industries Evergreen (1.5 g/hr)
- Sierra Products S8000II TEC (1.7 g/hr)
- Stove Builder International 1.4R Series: Osburn 950 N (1.7 g/hr)
- Glen Dimplex New Zealand Nectre N65 (2 g/hr)
Frequently asked questions
Is the Travis Industries Medium Flush Wood Hybrid Fyre Insert EPA certified?
The Travis Industries Medium Flush Wood Hybrid Fyre Insert holds EPA certification number 144-18 but is no longer on the current certified list — it is previously certified, which usually means the model is out of production. Already-installed units are unaffected by that status in most jurisdictions.
What is the Travis Industries Medium Flush Wood Hybrid Fyre Insert's emission rate?
The Travis Industries Medium Flush Wood Hybrid Fyre Insert is certified at 1.7 grams of particulates per hour (tested with cord wood). Real-world emissions depend heavily on fuel moisture and operation — the lab figure assumes seasoned fuel and correct air settings.
How many square feet can the Travis Industries Medium Flush Wood Hybrid Fyre Insert heat?
Roughly 2,000–2,800 sq ft, estimated from its 69,982 BTU/h peak output at 25–35 BTU/h per square foot. Insulation, climate, ceiling height, and floor plan move this figure substantially in both directions.
Does the Travis Industries Medium Flush Wood Hybrid Fyre Insert qualify for a federal tax credit?
No — the federal 25C credit for biomass stoves was terminated for property placed in service after December 31, 2025. The Travis Industries Medium Flush Wood Hybrid Fyre Insert's certified efficiency is 76% HHV, which met the credit's ≥75% HHV threshold while it existed. State and local incentive programs may still apply — check your state energy office and air district.
Sources
- cfpub.epa.gov (retrieved 2026-07-23)