Travis Industries Large Flush Wood Insert
Travis Industries Large Flush Wood Insert is a non-catalytic wood stove from Travis Industries certified at 1.7 g/hr particulate emissions with 73% HHV efficiency and a 17,900–66,736 BTU/h output range (previously certified, no longer in production).
Previously certified (out of production). This model appears in the EPA Certified Wood Heater Database but is no longer on the current certified list, which usually means it is no longer manufactured. The specifications below are its certified figures, kept for reference and for owners of installed units. Browse currently certified heaters for models sold new today.
| Appliance type | wood-stove |
|---|---|
| Combustion technology | Non-Catalytic Stove |
| Certified fuel | Cord Wood |
| Covered model numbers | Large Flush Wood Insert |
| Emission rate | 1.7 g/hr |
|---|---|
| Carbon monoxide | 0.218 g/min |
| Efficiency (HHV) | 73 % |
|---|
| Heat output (low) | 17900 BTU/h |
|---|---|
| Heat output (high) | 66736 BTU/h |
| Firebox volume | 2.8 cu ft |
| 25C tax credit eligible (≥75% HHV) | No |
|---|---|
| 2020 NSPS compliant | Yes |
| Currently in production | No |
| EPA certification number | 258-20 |
What space does the Travis Industries Large Flush Wood Insert suit?
- Its 66,736 BTU/h peak output covers roughly 1,900–2,650 sq ft at the 25–35 BTU/h-per-square-foot rule of thumb — see the sizing calculator to adjust for your insulation and climate.
- The 2.8 cu ft firebox puts it in the mid-size home class.
- Rough fuel use: about 3.2 cords per season at the midpoint of its output range (8 burn-hours/day, 150-day season, 22 MMBtu/cord — see methodology).
- Certified burning Cord Wood — the test fuel closest to real-world firewood.
Similar wood stoves
- Travis Industries Endeavor (1.4 g/hr)
- Stove Builder International 15-W06 (1.8 g/hr)
- Pacific Energy Fireplace Products Limited FP30 LE (1.7 g/hr)
- United States Stove Company TR007E (1.3 g/hr)
- Glen Dimplex New Zealand Nectre N65 (2 g/hr)
- Travis Industries 36 Elite (1.3 g/hr)
Frequently asked questions
Is the Travis Industries Large Flush Wood Insert EPA certified?
The Travis Industries Large Flush Wood Insert holds EPA certification number 258-20 but is no longer on the current certified list — it is previously certified, which usually means the model is out of production. Already-installed units are unaffected by that status in most jurisdictions.
What is the Travis Industries Large Flush Wood Insert's emission rate?
The Travis Industries Large Flush Wood Insert is certified at 1.7 grams of particulates per hour (tested with cord wood). Real-world emissions depend heavily on fuel moisture and operation — the lab figure assumes seasoned fuel and correct air settings.
How many square feet can the Travis Industries Large Flush Wood Insert heat?
Roughly 1,900–2,650 sq ft, estimated from its 66,736 BTU/h peak output at 25–35 BTU/h per square foot. Insulation, climate, ceiling height, and floor plan move this figure substantially in both directions.
Does the Travis Industries Large Flush Wood Insert qualify for a federal tax credit?
No — the federal 25C credit for biomass stoves was terminated for property placed in service after December 31, 2025. The Travis Industries Large Flush Wood Insert's certified efficiency is 73% HHV, which did not meet the credit's ≥75% HHV threshold while it existed. State and local incentive programs may still apply — check your state energy office and air district.
Sources
- cfpub.epa.gov (retrieved 2026-07-23)