Hardy Manufacturing KB-165

Hardy Manufacturing KB-165 is a non-catalytic hydronic heater from Hardy Manufacturing certified at 3.9 g/hr particulate emissions with 57% HHV efficiency (previously certified, no longer in production).

Previously certified (out of production). This model appears in the EPA Certified Wood Heater Database but is no longer on the current certified list, which usually means it is no longer manufactured. The specifications below are its certified figures, kept for reference and for owners of installed units. Browse currently certified heaters for models sold new today.

General
Appliance type hydronic-heater
Combustion technology Non-Catalytic Stove
Certified fuel Cord Wood
Covered model numbers KB-165
Emissions
Emission rate 3.9 g/hr
Efficiency
Efficiency (HHV) 57 %
Heat output
Heat output (high) 150000 BTU/h
Certification
25C tax credit eligible (≥75% HHV) No
2020 NSPS compliant No
Currently in production No

What space does the Hardy Manufacturing KB-165 suit?

Similar hydronic heaters

Frequently asked questions

Is the Hardy Manufacturing KB-165 EPA certified?

The Hardy Manufacturing KB-165 holds EPA certification number n/a but is no longer on the current certified list — it is previously certified, which usually means the model is out of production. Already-installed units are unaffected by that status in most jurisdictions.

What is the Hardy Manufacturing KB-165's emission rate?

The Hardy Manufacturing KB-165 is certified at 3.9 grams of particulates per hour (tested with cord wood). Real-world emissions depend heavily on fuel moisture and operation — the lab figure assumes seasoned fuel and correct air settings.

Does the Hardy Manufacturing KB-165 qualify for a federal tax credit?

No — the federal 25C credit for biomass stoves was terminated for property placed in service after December 31, 2025. The Hardy Manufacturing KB-165's certified efficiency is 57% HHV, which did not meet the credit's ≥75% HHV threshold while it existed. State and local incentive programs may still apply — check your state energy office and air district.

Sources